Questions? Feedback? powered by Olark live chat software

Electro-Voice FR 15" 2-W 90x60 Speaker PIW

(No reviews yet) Write a Review
Please Call - 1-855-643-2787
Calculated at Checkout

Out of Stock - Available to order Although we don't have stock of this, you can still make a purchase now and we'll order it from our supplier immediately. Contact us if you require a more detailed delivery estimate.

Frequently bought together:




The white EVF-1152S Single 15” 2-Way Full-Range Semi-Outdoor Loudspeaker System from Electro-Voice is a high-power, 2-way loudspeaker system that can be used in a variety of applications where high-quality sound reinforcement is required. It utilizes the ND2B 2” titanium compression driver, coupled to a Constant Directivity 90° x 60° waveguide. The system also uses SMX2151 15” woofer, developed using FEA optimization for motor, suspension, and electrical design to ensure very low distortion, high efficiency, and maximum intelligibility at high SPL. The crossover uses steep, 24 dB per octave slopes with equalization for very smooth response in the vocal range, linear off-axis response, and a protection circuit for long-term reliability.

The trapezoidal enclosure is constructed out of weather resistant birch, and coated with EVCoat for maximum protection from the elements. This PI-weatherized loudspeaker system is rated for outdoor exposure only in protected areas such as under a roof overhang. The acoustic and rigging design allows for vertical and horizontal clusters to be built using any combination of loudspeakers from the entire EVF and EVH series. The loudspeaker offers 7 horn patterns with an assortment of low-frequency and subwoofer loudspeakers to maximize flexibility of system design as per your requirements. The input panel features a Phoenix-style connector and included gland-nut cover plate. In addition, an externally accessible jumper selects passive or active operation.


ND2B 2" diaphragm and 1.4" exit pure titanium compression driver
SMX2151 15" LF transducer with a fully symmetric drive
Fourth-order crossover network with HF protection
Coverage pattern 90° x 60° and constant directivity 12" rotatable waveguide
101 dB sensitivity and 134 dB maximum SPL
Twenty-two M10 threaded suspension points
Comes with a Phoenix-style connector and a gland-nut with input panel cover plate (included)


Frequency Response -3 dB: 70 Hz to 14 kHz
Frequency Range -10 dB: 41 Hz to 18 kHz
Frequency Receiver High Pass: 45 Hz
Axial Sensitivity 101 dB (1 W / 1 m)
SPL Maximum Calculated: 134 dB
Coverage Horizontal: 90° (or 60°)
Vertical: 60° (or 90°)
Power Handling 500 W continuous, 2000 W peak
Rating Active
Continuous: LF 400 W / HF 40 W Peak: 1600 W / 160 W
Low Frequency Transducer SMX2151, 15" (381 mm) driver
High Frequency Transducer ND2B, 2" (51 mm) diaphragm compression driver
Crossover Frequency 1450 Hz
Nominal Impedance 8 Ohms
Minimum Impedance 6 Ohms
Connectors Dual four-pin contact 10 AWG Phoenix/EuroBlock style screw terminal
Gland-nut with included input panel cover plate
Enclosure 13-ply birch weather-resistant PI-finished
Grille Stainless steel with hydrophobic cloth
Suspension 22 x M10 threaded suspension points
Dimensions (H x W x D) 30.26 x 18.5 x 18.37" (768.6 x 469.8 x 466.6 mm)
Weight 70.9 lb (32.2 kg)
View AllClose