Questions? Feedback? powered by Olark live chat software

Electro-Voice Prem 12" 2-W 90x40 Speaker FGW

(No reviews yet) Write a Review
Please Call - 1-855-643-2787
  • Electro-Voice Prem 12" 2-W 90x40 Speaker FGW
  • Electro-Voice Prem 12" 2-W 90x40 Speaker FGW
Frequently bought together:




The white EVF-1122D Single 12” 2-Way Full-Range Outdoor Loudspeaker System from Electro-Voice is can be used in a variety of applications where high-quality sound reinforcement is required. It utilizes the high-output DH7N 3” titanium compression driver, coupled with a constant directivity 90° x 40° waveguide. The DVX3121A 12” woofer was developed using FEA optimization for motor, suspension, and electrical design to ensure very low distortion, high efficiency, and maximum intelligibility at high SPL. The crossover uses steep, 24-dB-per-octave slopes with equalization for smooth response in the vocal range, linear off-axis response, and a protection circuit for long-term reliability.


The trapezoidal enclosure is constructed of weather-resistant birch, and coated with fiberglass for maximum protection from extreme outdoor elements. The acoustic and rigging design allows for vertical and horizontal clusters to be built using any combination of loudspeakers from the entire EVF and EVH series. The input panel features a dual 4-pin 10 AWG Phoenix-style connector and includes a gland-nut cover plate. An externally accessible jumper selects passive or active operation.

  • DH7N 3” diaphragm, 1.4” exit pure titanium compression driver
  • DVX3121A 12” LF transducer with fully symmetric drive
  • Advanced fourth-order crossover network with HF protection
  • Coverage pattern of 90° x 40° constant directivity 12” rotatable waveguide
  • 97 dB sensitivity, 131 dB maximum SPL
  • 22 x M10 threaded suspension points
  • Comes with a Phoenix-style connector and includes CDG dual-gland-nut input panel cover plate for weatherizing


Frequency Response -3 dB: 118 Hz to 18 kHz
Frequency Range -10 dB: 66 Hz to 21 kHz
Coverage Rotatable: 90° x 40°
Frequency Receiver High Pass: 65 Hz
Passive Crossover Frequency 1300 Hz
Axial Sensitivity 97 dB (1 W @ 3.28' / 1 m)
LF Transducer - DVX3121A: 98 dB (1 W @ 3.28' / 1 m)
HF Transducer - DH7N: 112 dB (1 W @ 3.28' / 1 m)
SPL Maximum Calculated: 131 dB
LF Transducer - DVX3121A: 131 dB
HF Transducer - DH7N: 137 dB
Power Handling Passive: 600 W continuous, 2400 W peak
LF Transducer - DVX3151A: 500 W continuous, 2000 W peak
HF Transducer - DH7N: 75 W continuous, 300 W peak
Impedance 8 Ohms (nominal), 6 Ohms (minimum)
LF Transducer - DVX3151A: 8 Ohms (nominal), 7.2 Ohms (minimal)
HF Transducer - DH7N: 8 Ohms (nominal), 6 Ohms (minimal)
Connectors Dual 4-pin 10 AWG Phoenix/Euro Block screw-terminals
CDG dual-gland-nut input panel cover plate (included)
Enclosure 13-ply birch weather-resistant fiberglass finished (IP55-rated)
Grille 18 GA stainless steel with hydrophobic cloth
Suspension 22 x M10 threaded suspension points
Dimensions (H x W x D) 30.26 x 16.00 x 16.27" (768.6 x 406.3 x 413.3 mm)
Weight 65.5 lb (29.7 kg)
View AllClose