Questions? Feedback? powered by Olark live chat software

Electro-Voice Prem 15" 2-W FR 90x60 Speaker PIB

(No reviews yet) Write a Review
SKU:
EVF1152D/96PIB.1
Condition:
New
Availability:
Please Call - 1-855-643-2787
Shipping:
Calculated at Checkout
  • Electro-Voice Prem 15" 2-W FR 90x60 Speaker PIB
  • Electro-Voice Prem 15" 2-W FR 90x60 Speaker PIB
$3,097.00

Out of Stock - Available to order Although we don't have stock of this, you can still make a purchase now and we'll order it from our supplier immediately. Contact us if you require a more detailed delivery estimate.

Frequently bought together:

Description

 

 

The black EVF-1152D Single 15” 2-Way Full-Range Semi-Outdoor Loudspeaker System from Electro-Voice is a high-power, 2-way loudspeaker system that can be used in a variety of applications where high-quality sound reinforcement is required. It utilizes the DH7N 3” titanium compression driver, coupled to a Constant Directivity 90 x 60° waveguide. The system also uses DVX3151A 15” woofer, developed using FEA optimization for motor, suspension, and electrical design to ensure very low distortion, high efficiency, and maximum intelligibility at high SPL. The crossover uses steep, 24 dB per octave slopes with equalization for very smooth response in the vocal range, linear off-axis response, and a protection circuit for long-term reliability.

The loudspeaker system is enclosed in a 13-ply birch PI-weatherized IP55-rated enclosure with EVCoat for protection from elements. This PI-weatherized loudspeaker system is rated for outdoor exposure only in protected areas such as under a roof overhang. The acoustic and rigging design allows for vertical and horizontal clusters to be built using any combination of loudspeakers from the entire EVF and EVH series. A 70.7/100V transformer kit can be easily mounted to the input panel for use in distributed systems.

The system offers 7 horn patterns with an assortment of low-frequency and subwoofer loudspeakers to maximize flexibility of system design as per your requirements. The input panel features a Phoenix-style connector and gland-nut cover plate for weatherizing applications. In addition, an externally accessible jumper selects passive or active operation.

 

DH7N 3" diaphragm and 1.4" exit pure titanium compression driver
DVX3151A 15" LF transducer with a fully symmetric drive
Comes with a Phoenix-style connector and CDG dual-gland-nut input panel cover
Fourth-order crossover network with HF protection
Coverage pattern of 90 x 60° and Constant Directivity 12" rotatable waveguide
100 dB sensitivity and 134 dB maximum SPL
Twenty-two M10 threaded suspension points
Features a CDG dual-gland-nut input panel cover and stainless-steel grille

Specifications:

Frequency Response -3 dB: 70 Hz to 18 kHz
Frequency Range -10 dB: 40 Hz to 21 kHz
Coverage Rotatable: 90 x 60°
Frequency Receiver High Pass: 45 Hz
Passive Crossover Frequency 1300 Hz
Axial Sensitivity 100 dB (1 W @ 3.28' / 1 m)
LF Transducer - DVX3151A: 100 dB (1 W @ 3.28' / 1 m)
HF Transducer - DH7N: 114 dB (1 W @ 3.28' / 1 m)
SPL Maximum Calculated: 134 dB
LF Transducer - DVX3151A: 133 dB
HF Transducer - DH7N: 139 dB
Power Handling Passive: 600 W continuous, 2400 W peak
LF Transducer - DVX3151A: 500 W continuous, 2000 W peak
HF Transducer - DH7N: 75 W continuous, 300 W peak
Impedance 8 Ohms (nominal), 6 Ohms (minimum)
LF Transducer - DVX3151A: 8 Ohms (nominal), 7.2 Ohms (minimal)
HF Transducer - DH7N: 8 Ohms (nominal), 6 Ohms (minimal)
Connectors Dual 4-pin 10 AWG Phoenix/Euro Block screw-terminals
CDG dual-gland-nut input panel cover
Enclosure 13-ply weather-resistant birch with EVCoat
Grille Stainless steel with hydrophobic cloth
Environmental IEC 60529 IP55
Suspension 22 x M10 threaded suspension points
Dimensions (H x W x D) 30.26 x 18.5 x 18.37" (768.6 x 469.8 x 466.6 mm)
Weight 75.7 lb (34.4 kg)
View AllClose